16 April 2021

115 t-3000 mm press brake for Slovenian workshop


Hi-Kval is a Slovenian subcontractor that deals with engineering and steel fabrication. Hi-Kval works with medium-sized orders and aims to offer a high quality service to its customers. For this reason it has always chosen Gasparini machines with simple configurations, but able to guarantee high repeatability and reliability over time.

In the last 15 years we have built for Hi-Kval an X-Press 100 t/3100 mm press brake, an X-Press 50 t/2100 mm press brake, and a 3-meter, 6-mm X-Cut guillotine shear. These are being supplemented by a 115-tonne X-Press press brake with a bending length of 3100 mm.

best press brake 4 axes delem cnc
promecam manual clamping hydraulic press brake

The new hydraulic press brake has a 200 mm stroke, a 400 mm open height, and a 400 mm throat. The backgauge has 2 CNC-controlled axes (X-R) and is equipped with 4 fingers with 3 stops. Thanks to the F function, the fingers can be moved beyond the bending line and repositioned manually by the operator in a very short time.

The press brake has been pre-arranged for the addition of sheet lifters, as can be seen from the parking spaces on the sides of the bench. The clamps are manual for both punches and dies. The CNC is a Delem DA-58T with overhead mounting arm.

100 tons 3 meters press brake bench

Related articles

By continuing to browse the site, you are agreeing to our use of cookies.