28 December 2023

X-Press 115/3000 for Timo d.o.o.

For Timo d.o.o., a company specialising in the production of furniture for healthcare facilities, we built a hydraulic press brake with a capacity of 115 tonnes and a table length of 3100 mm. This press brake is characterised by its Easy design, has an open-height of 400 mm and a stroke of 200 mm.

It is equipped with the E-Reflex deformation compensation system, which guarantees the control of the bending of the structure by means of a network of sensors, located both inside the machine and in the hydraulic system. In addition, the customer chose to apply the automatic hydraulic crowning system.

In terms of clamping systems, the customer opted for:

  • intermediate with self-aligning quick-release lever Toolever 100 mm high
  • manual lower clamping

The CNC is a Delem DA-66S type, with Delem Profile Lite TL 2D offline software.

This machine has been prepared for the Tele-Link remote assistance function.

The backgauge is 4-axis (X-R-Z1-Z2) CNC-controlled, which in addition to the two standard axes also features the Z1 and Z2 axes. It is characterised by the addition of a reference and a stop on one of them.

The safety device implemented is the DSP-AP Laser, which provides a reduction in speed and a decrease in cycle time. The system emits a visible laser beam that complies with EN12622 standards and ensures that the operator is protected from any danger of being crushed between the die and the punch. This solution is an improvement over older light curtains or single-beam guards that no longer meet current standards.

This press brake also features

  • 1 standard foot pedal
  • 2 standard front supports
  • LED lighting of the working area
Would you like to receive more information about our products and services?
Site map